Use three segments to create a complete Trio luminiare.

For 4' Diameter Lensed or Louvered:
Place first 2' segment.  
Place second 2' segment -1.556', +.904' from segment 1 and rotate 300 degrees
Place the third segment -1.556', -.904' from segment 1 and rotate 60 degrees
Create a Luminaire Group with the three segments, Insertion point as appropriate


For 4' Diameter with PSE:
Download and import the Point Source IES file
Place first 2' segment.  
Place a Point Source End 1.02' from the center of segment 1
Place second 2' segment -1.341', +.774' from segment 1
Place a Point Source End -1.02' from the center of segment 2
Create a group with the segment and PSE, insertion point at center of segment 2
Rotate segment 2 group 300 degrees
Place the third segment -1.341', -.774' from segment 1
Place a Point Source End -1.02' from the center of segment 3
Create a group with the segment and PSE, insertion point at center of segment 3
Rotate segment 3 group 60 degrees
Explode the segment groups, then create a Luminaire Group with all three segments and Point Source Ends, Insertion point as appropriate


For 4' Diameter with LE:
Download and import the "FSM1FP-xxxxxx-_Lit_End" file that matches fixture direct output
Place first 2' segment.  
Place a Lit End Cap 1.024' from the center of segment 1
Place second 2' segment -1.535', +.886' from segment 1
Place a Lit End Cap -1.024' from the center of segment 2, rotate it 180
Create a group with the segment and LE, insertion point at center of segment 2
Rotate segment 2 group 300 degrees
Place the third segment -1.535', -.886' from segment 1
Place a Lit End Cap -1.024' from the center of segment 3
Create a group with the segment and LE, insertion point at center of segment 3
Rotate segment 3 group 60 degrees
Explode the segment groups, then create a Luminaire Group with all three segments and Lit End Caps, Insertion point as appropriate


For 6' Diameter Lensed or Louvered:
Place first 3' segment.  
Place second 3' segment -2.285', +1.319' from segment 1 and rotate 300 degrees
Place the third segment -2.285', -1.319' from segment 1 and rotate 60 degrees
Create a Luminaire Group with the three segments, Insertion point as appropriate


For 6' Diameter with PSE:
Download and import the Point Source IES file
Place first 3' segment.  
Place a Point Source End 1.516' from the center of segment 1
Place second 3' segment -2.093', +1.209' from segment 1
Place a Point Source End -1.516' from the center of segment 2
Create a group with the segment and PSE, insertion point at center of segment 2
Rotate segment 2 group 300 degrees
Place the third segment -2.093', -1.209' from segment 1
Place a Point Source End -1.516' from the center of segment 3
Create a group with the segment and PSE, insertion point at center of segment 3
Rotate segment 3 group 60 degrees
Explode the segment groups, then create a Luminaire Group with all three segments and Point Source Ends, Insertion point as appropriate


For 6' Diameter with LE:
Download and import the "FSM1FP-xxxxxx-_Lit_End" file that matches fixture direct output
Place first 3' segment.  
Place a Lit End Cap 1.524' from the center of segment 1
Place second 2' segment -2.285', +1.319' from segment 1
Place a Lit End Cap -1.524' from the center of segment 2, rotate it 180
Create a group with the segment and LE, insertion point at center of segment 2
Rotate segment 2 group 300 degrees
Place the third segment -2.285', -1.319' from segment 1
Place a Lit End Cap -1.524' from the center of segment 3
Create a group with the segment and LE, insertion point at center of segment 3
Rotate segment 3 group 60 degrees
Explode the segment groups, then create a Luminaire Group with all three segments and Lit End Caps, Insertion point as appropriate